Aftermarket Auto Parts Vs Used OEM Auto Parts Vs Brand New Discounted Parts

Alright! The worst thing has happened to your car and that worn out / damaged part needs a replacement. What is the first thing that comes to your mind?

I am sure it would be, “how do I get a replacement part that fulfills the need at the lowest possible price?” And believe me; most sensible people would think the same way.

Let’s face it; nobody likes to spend big bucks on car repairs and part replacements. In fact, if given a choice, nobody would even want to be in a situation where his/her car needs a repair or a replacement part.

This is basic human nature and we all exhibit it. As far as I am concerned, I would rather spend extra money on a fancy car stereo than go for a costly replacement auto part. I would any day prefer the cheapest possible repair or part replacement that does the job and so would you unless you are a celebrity and money sticks to you like a shadow.

So what are the options you can consider if your vehicle needs a replacement part?

In the current market scenario, we have 3 major options namely:

  • Aftermarket Parts
  • Used OEM Parts
  • Brand New Discounted Parts

Let’s discuss the pros and cons of each so that we can make a decision.

Aftermarket Parts for a vehicle may be defined as auto parts made by a manufacturer other than the original vehicle manufacturer.

But that is not necessarily the correct definition as most vehicle manufacturers do not make all the parts themselves. They may ask a different company to manufacture a certain auto part for them. In that case, the first definition would not hold true.

I believe the following example would make the concept clear.

If you are fitting an Air Filter in your ABC car and that Air Filter is not manufactured, not considered a standard fitment (stock option) and not recommended by the ABC Company, it qualifies as an aftermarket part as far as ABC Company is concerned. In that case, all warranty from ABC Company for your ABC car is void.

That is not the only consequence of fitting aftermarket parts in your vehicle. These parts are not tested for compatibility with all makes and models of cars. As a result, an aftermarket part may not function properly in your car leading to unforeseen problems. For example, an aftermarket Air Filter can harm you car engine if it is not compatible with your car model resulting in low engine-efficiency or perhaps total engine damage.

Aftermarket parts don’t necessarily confirm to laws and regulations for quality and performance. For Example, aftermarket headlights may not confirm to the local regulations in your state or perhaps your aftermarket engine does not meet the emission standards in your state. It is imperative that you ascertain correct details and features of an aftermarket part before you purchase it.

Depending on factors like quality and brand-name, an aftermarket part can cost less, equal or more than a brand new OEM part.

A good quality aftermarket part manufactured by a company specializing in a particular domain qualifies as a performance enhancing auto part and usually costs more than what a brand new normal OEM part would. Unless you are willing to shell out money on car customization, you don’t need to tread that path.

One truth about aftermarket parts holds good even today; “use it at your own peril.”

Used OEM auto parts for a vehicle are manufactured by the same manufacturer that made the vehicle. The only factor being, these parts are not brand new. They have been used before, probably in another vehicle of the same make and somehow found their way to a scrap-yard or salvage-yard.

In this case, a fact that one should consider before purchasing a used auto part is that used parts from a certain ABC car most probably will fit only ABC cars of the same model and year as per company standards. This is because manufacturers might introduce slight changes or enhancements in auto part designs and specifications every year for any particular model.

Since all OEM auto parts from a particular car manufacturer are of the same quality and tested for optimum performance by the manufacturer, you don’t end up making any compromises on this front. Remember, this is not the case with aftermarket parts.

Used auto parts could be your best option in terms of cost-effectiveness and quality provided you select the correct auto part online and buy it from a recognized seller only. The advantage of buying from established sellers is that you get original quality tested parts at low prices and usually with no shipping charges.

The only worrying factor about used auto parts may be about their history. The part could be salvaged from a car that got destroyed in an accident or perhaps from a car that was scrapped after serving a lifetime. Then there are also some used auto parts available that were used by the original manufacturer for testing purposes.

Whatever be the history of the part, you can get a confirmation from the seller over the phone before buying. Major used auto-part dealers exercise quality control by maintaining a log about the condition and history of a particular auto part so that the customer knows about the exact age and origin of the part he/she is buying.

Moreover, vehicle’s manufacturer warranty does not get nullified if you install a used OEM part in your vehicle.

Used auto parts are the most cost effective out of all the three options since they cost just about one-third the price of brand new OEM auto parts.

Brand New Discounted Auto Parts probably don’t need any description. These are brand new auto parts sold at discount prices. Definitely a great option but these are not available everyday and at every store. In fact, they are available occasionally and at the sole discretion of the dealer. If you are lucky enough, you might find the part you need on discount but as is the case usually, the parts that are sold at a discount are the ones that have the least demand. Hence, if you desperately need a brand new replacement part for your car, you might have to wait till it is available at discount prices.

To conclude, you can choose any of these options depending on your need and suitability but please remember that in the case of repairs and part replacements, you should take a step only after weighing the pros and cons of each available option.

Happy Motoring!

James Rodham

www.QualityAutoParts.com

Electrifying Facts on Electric Vehicle Conversion – All You Need to Know

Right now, with the gas at prices that we have never seen before, many people are looking for ways to cut down on gas consumption and there are some people who are looking at ways to avoid using gas at all. They are researching electric vehicle conversion which is converting a car or small truck to run on electricity instead of gas. There are many benefits to having vehicle that runs on just electric but an electric vehicle conversion is no simple task. The benefits for the vehicle are, smooth running, low maintenance, low vibration, economical, and totally convenient. An electric vehicle conversion is complicated. As well as no longer using gas the vehicle will no longer use oil, an exhaust, belts, hoses, water pump, coolant, radiator, spark plugs, plug wires, and injectors. So this is not a job that should be undertaken by an amateur.

If you are a mechanic who knows what they are doing, the electric vehicle conversion can be done in your own garage, with few specialist tools. The materials needed for the electric vehicle conversion is of course the electric motor, the motor mount, motor controller, speed controller, system control box, high current shunt, high current fuse, high current circuit breaker, current meter, voltmeter, clutch plate hub adapter, main battery bank, 12V battery charger, 6V golf cart batteries (common choice), battery rack, cable terminal lugs, along with a vacuum pump and switch kit for the brakes.

Other materials for the electric vehicle conversion will include any kind of framework that you would want to use to house the batteries that are needed to run the vehicle. Cars that are most commonly used used in electric vehicle conversion are the Chevy S10, Dodge Colt, Daytona Ford Escort, Porsche 914, Honda Civic, Mazda B2000 pickup, Datsun pickup, Plymouth Sundance, Pontiac Fiero, Suzuki Samurai, Toyota pickup, and Volkswagen Beetles.

The cost of the electric vehicle conversion will vary and depend greatly on the vehicle that is going to be converted. This can range from $6500 and $9500 dollars and that estimate does not include the cost of the vehicle itself.

Depending on the size of the vehicle and the number of batteries that are used in the conversion, the distance the vehicle can drive on one charge will vary accordingly. The general Chevy S10 which has 16 six-volt batteries and weighs a total of 3700 pounds, will go about 35 miles on a full charge. If you have more batteries on a lighter car, then you will be able to go much further on a single charge.

The weight of the vehicle will also factor on how fast the vehicle will be able to go. The lighter the car and more batteries, the faster it can go. Historically electrically converted cars were slow but now they can achieve speeds of 60 to 80 mph.

Deciding on whether this option is right for you really depends on your mileage, how long you intend to keep you vehicle, and of course your commitment to the environment. Hopefully i’ve sparked enough interest for you to want to find out more.

New Auto Parts Vs Used Auto Parts

If you have ever put used auto parts on your vehicle, you might have stood in front of two rusty car parts trying to remember which one you just purchased, because they both look rusty and worn out. Certain auto parts are absolutely fine to purchase used, and in some cases may be your only option. There are a variety of parts that are considered regular wear auto parts and should not typically be purchased used.

Struts and Strut Assembly do not get these auto parts used. Once you have a strut is separated from its assembly you can test that strut. You should be able to depress and extend that strut, all the while, feeling a uniform pressure. Being able to do this demonstrates a strut works without load, however being able to tell how long that strut is going to operate is mostly a guess. Buying a used complete strut assembly, on the other hand, is even more of a guessing game. A junk yard will have these things removed from various vehicles, and they are often of unknown or fictitious mileage; and of course you aren’t able to test the strut when the spring has not been removed from the assembly.

Brake Rotors and Brake Pads are probably the most common automobile wear car parts. They can usually be purchased cheap enough that it is simply not worth your time installing a used set. Each brake pad has worn grooves into each side of the rotor and after that brake pad to brake rotor seat has been made, you don’t want to change any relative positions. Since brake rotors will rust almost instantly after they have sat for any period of time, it is very rare that anyone would be interested in installing these brake components used.

Hub Bearings and Hub Assemblies are another thing that is completely pointless to purchase used. You are either spending your own time installing the hub bearing, or paying a mechanic to install the hub bearing that may fail at any time. Time and mileage are both contributing factors to the failure of a hub bearing. It is difficult to tell if a hub bearing is OK before installing it, and virtually impossible to tell how long it will last. The longer the hub bearing has sat the more chances there are for that hub assembly to fail.

Alternators are another guessing game. A used one may last another 10 year… or not. The lifespan of a used alternator depends on a lot of factors. Mileage, age, how long it has been sitting, and how much corrosion it has built up. Are you willing to put up with a failed alternator? Will you install it yourself? Are you getting a great deal on it? Is a new alternative too expensive? These are all valid considerations; the issue is the unknown reliability of a used car part like this.

There are many Auto Parts stores specializing in the sale of these basic maintenance car parts. As the competition gets fiercer the prices on these basic maintenance auto parts get closer and closer to the price that a lot of junk yards are asking for used auto parts. We are currently seeing some of the cheapest replacement auto parts that are available for a wide selection of cars and these car parts are brand new. This has been the result of a variety of automotive distribution centers that are avoiding costly overhead and advertising costs associated with developing a brand and maintaining retail outlets.

When replacing auto parts on your car, generally, you want to use new auto parts, especially when it comes to basic wear parts.